Technical Specs for Our Injection Molding Machines

Metric Units

Spec	Units	100-Tonne	161-Tonne
Shot Volume	cm³	149	259
Shot Weight (PS)	g	135	243
Screw Diameter	mm	35	42
Max. Injection Pressure	Mpa	193	194
Injection Rate (PS)	g/s	93	118
Plasticizing Rate (PS)	g/s	13	20
Screw RPM	rpm	200	190
Mold Clamp Force	kN	980	1580
Max. Clamping Stroke	mm	330	400
Tie Bar Space	mm	380 x 355	431 x 431
Mold Thickness	mm	150-380	150-460
Ejector Force	kN	39	39
Ejector Stroke	mm	100	115
Heater Capacity	kW	6.85	10.1
Machine Dimensions	m	4.1x1.1x1.8	4.4x1.2x1.9
Machine Mass	t	3.8	4.7

Spec	Units	110-ton	178-ton
Shot Volume	in³	9.09	15.8
Shot Weight (PS)	oz	4.76	8.57
Screw Diameter	in	1.4	1.7
Max. Injection Pressure	psi	28000	28100
Injection Rate (PS)	oz/s	3.3	4.16
Plasticizing Rate (PS)	oz/s	0.46	0.71
Screw RPM	rpm	200	190
Mold Clamp Force	tonf	110	178
Max. Clamping Stroke	in	13.0	15.7
Tie Bar Space	in	15 x 14	17 x 17
Mold Thickness	in	5.9-15	5.9-18
Ejector Force	tonf	4.4	4.4
Ejector Stroke	in	3.9	4.5
Heater Capacity	kW	6.85	10.1
Machine Dimensions	ft	13x3.6x5.9	14x3.9x6.1
Machine Mass	ton	4.2	5.2